INFORMATION
|
№ |
Surname. Name and patronymic. |
Topic. |
Specialization |
Short annotation. |
Protection date |
|
1 |
Maxkamov Dilshod Ismatillaevich.
|
"Development of deformation-shear-resistant composite asphalt concrete materials for road surfaces by mechano-chemical modification of organomineral components" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials
|
The dissertation work is based on the identification of the legal dependence of the main physical-mechanical and operational properties depending on the chemical composition, microstructure, content and ratio of components of asphaly-toterous composite materials based on organic and inorganic ingredients. |
2017-12-02 |
|
2 |
Kobilov Nodirbek Sobirovich. |
"Development of composite chemical reagents for weighted drilling fluids used for drilling oil and gas wells" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials |
The thesis work is based on local raw materials and by-products from highly efficient technology producing products with a scientific basis for the development of new chemical reagents for oil and gas drilling. |
2017-12-05 |
|
3 |
Kholmurodova Dilafruz Quvatovna. |
"Development of an effective composition of composite wood-plastic board materials based on local raw materials and industrial waste" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials
02.00.05 - Chemistry and pulp and paper production technology (technical sciences) |
The dissertation is devoted to the production of composite wood-plastic and cardboard materials based on cotton fillers and polymer binders and their introduction into production, which play a key role in solving this problem. At the same time, the use of secondary resources, especially agricultural waste, meets the needs of the republic in wood and plastic materials and boards and solves current problems in the application of modern innovative technologies. . |
2018-04-06 |
|
4 |
Javliev Sirojiddin Suyunovich. |
"Development of effective compositions of vibration-damping composite polymeric materials and technology for obtaining coatings based on them" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials 05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
Thesis work is devoted to solving the problem of noise prevention and the development of effective compositions of vibrodeming composite polymer materials and technology to obtain At the same time, reducing noise levels when using vibrating polymeric materials and coatings in the working bodies of machines and mechanisms solves the current problems of using modern innovative technologies with increased performance. |
2019 -06-29
|
|
5 |
Tukhtasheva Malohat Nafasovna. |
"Development of an effective technology for the production of anti-friction-wear-resistant composite materials and ring-shaped parts from them" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials
05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
The dissertation work solves the problem of developing machines and mechanisms for the production of cotton based on local raw materials, as well as composite polymer materials for engineering and pile parts of them. |
2018-05-08 |
|
6 |
Shernaev Anvar Normamatovich. |
"Development of effective compositions of antifriction composite wood-polymer materials based on local raw materials and machine-building parts" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials 05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
In the dissertation work, the effective compositions of antifriction composite wood-polymer materials (AKPYOM), filled with modified polymer compositions with ingredients, and their physical and mechanical, antifriction properties were studied; the regularities of the influence of the type and amount of mineral and organic fillers on the physical-mechanical and antifriction properties of polymeric materials are revealed. |
2017-07-19
|
|
7 |
Eshkobilov Olim Kholikulovich. |
"Development of a methodology and installation for the study of antifriction properties of machine-building composite polymer materials and technology for obtaining coatings based on them, working in interaction with pulp (for example, raw cotton)" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials 05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
The dissertation work is based on the theory of molecular-mechanical electrical friction as a criterion for assessing the antifriction properties of mechanical composite polymer materials in the process of interaction with cotton fiber, the possibility of imitating the working conditions of working bodies of cotton processing machines on the basis of the developed technique and device is explained by the coefficient of friction in the friction zone, temperature in the friction zone and the formation of electrostatic charges. |
2018-12-25
|
|
8 |
Tolibov Bekhzod Ibrahimovich. |
Development of an effective technology for the processing of sulfide materials in the suspended kiln to increase the yield of valuable components and intensify the process |
05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
The dissertation work is relevant for the science and practice of the mining and metallurgical industries in the development of new technologies to improve the extraction of metals and improve existing technologies. |
2019-09-25 |
|
9 |
Kamalova Dilnavoz Ikhtiyorovna.
|
"Development of modified composite polymer materials and technologies for their production for the electronics industry" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials 01.04.06 - Polymerlar Physics. |
The dissertation is important for the development of simple, rare, durable, inexpensive semimetals, metal glasses and other forms of metals used in microelectronics and instrument making, as well as for the creation of light guides, various devices and devices based on them. |
2019-11-02 |
|
10 |
Eminov Sherzod Olimjonovich. |
"Anti-electrostatic composite polymer materials and technology for obtaining coatings for tribotechnical purposes for cotton processing machines and mechanisms (for example, raw cotton)" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials 05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
The dissertation work is necessary and relevant in solving the problem of preserving the natural properties of fiber in the process of friction between cotton fiber and the working body, covering the working bodies of machines and mechanisms with composite coatings based on local raw materials. |
2019-11-06 |
|
11 |
Voxidov Bakhriddin Rakhmidinovich.. |
"Development of a method for producing refined palladium in powder from spent electrolyte" |
05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
The dissertation work is devoted to the development of new technologies to increase the recoverable mass of precious metals of the platinum group and to improve existing technological schemes, solves the urgent problems of science and practice of the mining and metallurgical industry. ... |
2019-12-16 |
|
12 |
Tuxtaev Feruz Sadulloevich.
|
" Development of effective compositions of composite polymer sorbents based on local and secondary raw materials and technology for their production " |
02.00.07 - Chemistry and technology of composite, paint and rubber materials
02.00.06 - high-molecular compounds |
The dissertation work is based on the interaction of CMMs used in the chemical and metallurgical industries for the treatment of industrial wastewater and the separation of non-ferrous, heavy and precious metals, mineral ingredients and metal compounds, as well as their mechanisms play an important role in the complex study of problems associated with a comprehensive study.
... |
2019-12-26
|
|
13 |
Abdukodirov Abdujalil Abdukhalilovich.
|
"Development of an improved technology for smelting copper sulfide concentrates in a reverberant furnace" |
05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
The thesis is devoted to the processing of clinker, ore dressing plant waste, copper smelter slag and industrial waste generated during the processing of zinc cake, which is one of the plant's waste.
... |
2019-12-28 |
|
14 |
Sultonov Sanjar Urazalievich.
|
"Development of effective compositions and technology for producing composite polymer materials and coatings based on them for corrosion protection of food production equipment" |
02.00.07 - Chemistry and technology of composite, paint and rubber materials
02.00.06 - high-molecular compounds |
In the dissertation, for the first time, effective composite polymer materials for corrosion protection of equipment for the production of drinks in the food industry and the technology of their production based on thermodynamically incompatible (epoxy-polyethylene) and thermodynamically compatible polymers (epoxy-epoxy polymers) were developed.
|
2020-05-28
|
|
15 |
Bozorboev Shukhrat Abdurahimovich.
|
"Mechanochemical activation of organomineral raw materials and the development with their use of modified composite polymer materials for mechanical engineering purposes"
|
02.00.07 - Chemistry and technology of composite, paint and rubber materials 05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
The dissertation work is devoted to the study of the parameters and technological modes of operation of the grinding dismembrator device using the "shock-breaking method" method, which allows you to choose a thesis and allows you to obtain high-strength antifriction-corrosion-resistant, durable composite polymer materials, mechanochemical phenomena, the formation of active centers, depending on their chemical composition and nature, chemical reactions that occur during the grinding of fillers.
|
16.06.2020 |
|
16 |
Abdurazakov Abduaziz Abdujabarovich.
|
"Development of composite materials based on thermomechanical combined thermoplastics with improved performance characteristics"
|
05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
The thesis is devoted to increasing the efficiency of operation of technological equipment used in road construction technologies, by conducting experiments in the thesis, composite materials based on thermoplastic combined thermoplastics for the manufacture of elements of belt conveyors with high technological parameters were created. |
17.06.2020 |
|
17 |
Avliyokulov Jamshed Sadulloevich. |
"Creation of composite materials based on polymer matrices for the manufacture and restoration of automotive units" |
05.02.01-Material studies in mechanical engineering. Foundry. Thermal processing and processing of metals with pressure. Metallurgy of black, non-ferrous and rare metals (material science and metallurgical areas |
In the dissertation work on the preparation and reconstruction of automobile units, composite materials based on a polymer matrix were created. Mixtures combined by thermomechanical methods "Thermoplastic elastomer (thermoplastic polyurethane (TPU), polyester-polyurethane (PES) - thermoplastic (acrylobutadiene-styrene plastic) (ABS), thermoplastic polyurethane UPS), polyvinyl chloride (PVC))" deformation and strength characteristics. |
27.06.2020 |
